Specifications

CLI Tasks, Command Functions and Syntax
OSPF virtual link (set)
A-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
OSPF virtual
link (set)
Router Defines an OSPF virtual link, which represents a logical connection
between the backbone and a non-backbone OSPF area. For details,
refer to Section 13.1.2.19.
area area_id virtual-link ip_address
OSPF virtual
link (show)
Router Displays information about the virtual links configured on a router.
For details, refer to Section 13.1.2.26.
show ip ospf virtual-links
password (set)
Switch Sets a login password. For details, refer to Section 3.2.1.4.
set password username
password aging
(set system)
Switch Sets the number of days user passwords will remain valid before
aging out, or disables user account password aging. For details,
refer to Section 3.2.1.6.
set system password aging {days | disable}
password
history (set
system)
Switch Sets the number of user login passwords that will be checked for
password duplication. For details, refer to Section 3.2.1.7.
set system password history size
password
length (set
system)
Switch Sets the minimum user login password length. For details, refer to
Section 3.2.1.5.
set system password length characters
ping (enable)
Router Enables the Internet Control Message Protocol (ICMP), allowing
the router to reply to IP ping requests. For details, refer to
Section 12.2.5.6.
ip icmp {echo-reply | mask-reply}
CLI Task Mode Command Function and Syntax