Specifications

CLI Tasks, Command Functions and Syntax
OSPF cost
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-23
OSPF (show)
Router Displays OSPF information. For details, refer to Section 13.1.2.21.
show ip ospf
OSPF area
authentication
Router Enables or disables authentication for an OSPF area. For details,
refer to Section 13.1.2.15.
area area-id authentication {simple | message-digest}
OSPF area
default cost
Router Sets the cost value for the default route that is sent into a stub area
by an Area Border Router (ABR). For details, refer to
Section 13.1.2.17.
area area-id default-cost cost
OSPF area
range
Router Defines the range of addresses to be used by Area Border Routers
(ABRs) when they communicate routes to other areas. For details,
refer to Section 13.1.2.14.
area area-id range ip_address ip_mask
OSPF
authentication
key
Router Assigns a password to be used by neighboring routers using OSPF’s
simple password authentication. For details, refer to
Section 13.1.2.11.
ip ospf authentication-key password
OSPF border
routers (show)
Router Displays information about OSPF internal entries to ABRs (Area
Border Routers) and ASBRs (Autonomous System Border
Routers). For details, refer to Section 13.1.2.23.
show ip ospf border-routers
OSPF
configuration
mode
Router Enables or disables OSPF router configuration mode. For details,
refer to Section 13.1.2.1.
router ospf process_id
OSPF cost
Router Sets the cost of sending an OSPF packet on an interface. For details,
refer to, Section 13.1.2.4.
ip ospf cost cost
CLI Task Mode Command Function and Syntax