Specifications

CLI Tasks, Command Functions and Syntax
MAC authentication port reauthenticate
A-20 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MAC
authentication
port
reauthenticate
Switch Forces an immediate reauthentication of the currently active
sessions on one or more MAC authentication ports. For details, refer
to Section 14.3.3.9.
set macauthentication portreauthenticate [port-string]
MAC
authentication
quiet period
Switch Sets the time (in seconds) following a failed MAC authentication
before another can be attempted through a port. For details, refer to
Section 14.3.3.12.
set macauthentication quietperiod value [port-string]
MAC
authentication
reauthentica-
tion (enable)
Switch Enables or disables reauthentication of all currently authenticated
MAC addresses on one or more ports. For details, refer to
Section 14.3.3.8.
set macauthentication reauthentication {enable | disable}
[port-string]
MAC
authentication
reauthentica-
tion period
Switch Sets the MAC reauthentication period (in seconds). This is the time
lapse between attempts to re-authenticate any current MAC address
authenticated to a port. For details, refer to Section 14.3.3.11.
set macauthentication reauthperiod seconds [port-string]
MAC
authentication
session (show)
Switch Displays the active MAC authenticated sessions on the device. For
details, refer to Section 14.3.3.2.
show macauthentication [port-string]
MAC locking
(clear)
Switch Clears MAC locking from one or more static MAC addresses. For
details, refer to Section 14.3.4.11.
clear maclock mac_address port-string
MAC locking
(set)
Switch Creates a static MAC address and enables or disables MAC locking
for the specific MAC address and port. When created and enabled,
this allows only the end station designated by the MAC address to
participate in frame relay. For details, refer to Section 14.3.4.5.
set maclock mac_address port-string {create | enable |
disable}
CLI Task Mode Command Function and Syntax