Specifications

CLI Tasks, Command Functions and Syntax
MAC authentication port initialize
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-19
MAC algorithm
(set)
Switch Sets the MAC algorithm mode, which determines the hash
mechanism used by the device when performing layer 2 lookups on
received frames. Each algorithm is optimized for a different spread
of MAC addresses. For details, refer to Section 11.2.3.12.
set mac algorithm {mac-random | mac-sequential |
mac-vid-random | mac-vid-sequential}
MAC
authentication
(set)
Switch Globally enables or disables MAC authentication. For details, refer
to Section 14.3.3.3.
set macauthentication {enable | disable}
MAC
authentication
(show)
Switch Displays MAC authentication information for one or more ports.
For details, refer to Section 14.3.3.1.
show macauthentication [port-string]
MAC
authentication
initialize
Switch Forces a current MAC authentication session to re-initialize and
removes the session. For details, refer to Section 14.3.3.7.
set macauthentication macinitialize mac_addr
MAC
authentication
reauthenticate
Switch Forces an immediate reauthentication of the specified MAC
address. For details, refer to Section 14.3.3.10.
set macauthentication macreauthenticate mac_addr
MAC
authentication
password (set)
Switch Sets a MAC authentication password. For details, refer to
Section 14.3.3.4.
set macauthentication password password
MAC
authentication
port (enable)
Switch Enables or disables one or more ports for MAC authentication. For
details, refer to Section 14.3.3.5.
set macauthentication port {enable | disable} [port-string]
MAC
authentication
port initialize
Switch Forces one or more MAC authentication ports to initialize and
removes any currently active sessions on those ports. For details,
refer to Section 14.3.3.6.
set macauthentication portinitialize [port-string]
CLI Task Mode Command Function and Syntax