Specifications

CLI Tasks, Command Functions and Syntax
MAC (set)
A-18 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
MAC (set)
Switch Adds MAC addresses to the switch IP routing table. For details,
refer to Section 11.2.3.7.
set mac mac_address vlan_id port-string {delete-on-reset |
delete-on-timeout | permanent}
Router Sets a MAC address on a routing interface. For details, refer to
Section 12.2.3.4.
ip mac-address address
MAC (show)
Switch Displays MAC addresses contained in the switch’s routing table.
For details, refer to Section 11.2.3.6.
show mac [address mac address] [fid vlan_id] [port
port-string] [type {learned | self | mgmt}]
MAC address
(clear)
Switch Deletes dynamic MAC address information for the switch. For
details, refer to Section 11.2.3.8.
clear mac [address mac_address vlan-id | port port-string | vid
vlan-id port-string]
MAC aging time
(clear)
Switch Resets the MAC address aging timer to the default value of 300
seconds. For details, refer to Section 11.2.3.11.
clear mac agingtime
MAC aging time
(set)
Switch Sets the time in seconds to age out inactive MAC address entries.
For details, refer to Section 11.2.3.10.
set mac agingtime seconds
MAC aging time
(show)
Switch Displays the current MAC aging time setting. For details, refer to
Section 11.2.3.9.
show mac agingtime
CLI Task Mode Command Function and Syntax