Specifications

CLI Tasks, Command Functions and Syntax
IGMP VLAN mode (set ip address)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-11
history buffer
size
(show)
Switch Displays the size (in lines) of the command history buffer. For
details, refer to Section 11.2.2.5.
show history
IGMP (set)
Switch Enables or disables IGMP (Internet Group Management Protocol)
snooping on the switch. For details, refer to Section 10.2.1.2.
set igmp {enable | disable}
IGMP (show)
Switch Displays current IGMP settings. For details, refer to
Section 10.2.1.1.
show igmp [groups | query-interval | response-time]
IGMP groups
(show)
Switch Displays a list of IGMP streams and client connection ports. For
details, refer to Section 10.2.3.1.
show igmp groups
IGMP query
interval (set)
Switch Sets the number of seconds between IGMP host-query frame
transmissions. For details, refer to Section 10.2.2.2.
set igmp query-interval intervaltime
IGMP query
interval (show)
Switch Displays the IGMP query interval in seconds. For details, refer to
Section 10.2.2.1.
show igmp query-interval
IGMP response
time (set)
Switch Sets the maximum IGMP response time in seconds. For details,
refer to Section 10.2.2.4.
set igmp response-time responsetime
IGMP response
time (show)
Switch Displays the IGMP response time setting. For details, refer to
Section 10.2.2.3.
show igmp response-time
IGMP VLAN
mode (set ip
address)
Switch Sets the virtual IP address through which IGMP multicast traffic
will be forwarded to all subscribing, or “open” ports. For details,
refer to Section 10.2.4.3.
set igmp mode ipaddress ip_address
CLI Task Mode Command Function and Syntax