Specifications

CLI Tasks, Command Functions and Syntax
flow control (set port)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-9
DVMRP (enable)
Router Enables or disables the Distance Vector Multicast Routing Protocol
(DVMRP) on an interface. For details, refer to Section 13.1.3.1.
ip dvmrp
DVMRP metric
(set)
Router Configures the metric associated with destinations for DVMRP
reports. For details, refer to Section 13.1.3.2.
ip dvmrp metric metric
DVMRP route
(show)
Router Displays the status of DVMRP (enabled or disabled) and entries in
the DVMRP routing table. For details, refer to Section 13.1.3.3.
show ip dvmrp route
EAPOL (set)
Switch Enables or disables EAPOL port-based user authentication with the
RADIUS server, and sets the authentication mode for one or more
ports. For details, refer to Section 14.3.2.8.
set eapol [enable | disable | auth-mode {auto |
forced-authorized | forced-unauthorized} port-string
EAPOL (show)
Switch Displays EAPOL settings for one or more ports. For details, refer to
Section 14.3.2.7.
show eapol [port-string]
event log (clear)
Switch Deletes all entries from the system event log. For details, refer to
Section 11.2.2.2.
clear eventlog
event log
(show)
Switch Displays the system event log. For details, refer to Section 11.2.2.1.
show eventlog
exit
Switch Exits a CLI session. For details, refer to Section 3.2.7.3.
exit
flow control (set
port)
Switch Enables or disables flow control for one or more ports. For details,
refer to Section 4.2.6.2.
set port flowcontrol port-string {disable | enable}
CLI Task Mode Command Function and Syntax