Specifications

CLI Tasks, Command Functions and Syntax
dot1x authentication configuration (set)
A-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
dot1x
authentication
configuration
(set)
Switch Configures 802.1X authentication. For details refer to
Section 14.3.2.4.
set dot1x auth-config {[authcontrolled-portcontrol value]
[keytxenabled{enabled | disabled}] [maxreq value]
[quietperiod value] [reauthenabled {enabled | disabled}]
[reauthperiod value] [servertimeout timeout] [supptimeout
timeout] [txperiod value]}
dot1x
authentication
configuration
(set port)
Switch Enablse or disables 802.1X reauthentication or initialization
control. For details refer to Section 14.3.2.5.
set dot1x port {[init {false | true}] [reauth false | true]}
dot1x
authentication
(show)
Switch Displays 802.1X status, authentication configuration information,
diagnostics, statistics, and reauthentication or initialization control
information for one or more port access entity (PAE) ports. For
details refer to Section 14.3.2.4.
show dot1x [auth-diag] [auth-session-stats] [auth-stats]
[port [init | reauth]] [port-string]
dot1x
authentication
configuration
(show port)
Switch Displays 802.1X authentication configuration settings for one or
more ports. For details refer to Section 14.3.2.2.
show dot1x auth-config [authcontrolled-portcontrol]
[keytxenabled] [maxreq] [quietperiod] [reauthenabled]
[reauthperiod] [servertimeout] [supptimeout] [txperiod]
[port-string]
download
Switch Downloads a new firmware image to the device from a TFTP server.
For details refer to Section 3.2.3.2.
dload hostname | ip_address filename [noreboot]
duplex (set
port)
Switch Sets the default duplex setting (half or full duplex) of one or more
ports. For details, refer to Section 4.2.3.2.
set port duplex port-string {full | half}
CLI Task Mode Command Function and Syntax