Specifications

CLI Tasks, Command Functions and Syntax
dot1x authentication (enable)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-7
DNS server (set)
Switch Adds a server to the DNS server list. For details, refer to
Section 11.2.3.16.
set dns server ip-address
DNS (show)
Switch Display DNS settings. For details, refer to Section 11.2.3.13.
show dns
DoS host
security
counters (clear)
Router Clears Denial of Service security counters. For details refer to
Section 14.3.8.3.
clear hostdos-counters
DoS host
security
(enable)
Router Enables or disables Denial of Service security features. For details
refer to Section 14.3.8.2.
HostDoS {land | fragmicmp | largeicmp size | checkspoof |
portscan number-of-ports}
DoS host
security (show)
Router Displays Denial of Service security status and counters. For details
refer to Section 14.3.8.1.
show HostDoS
dot1x
authentication
(clear)
Switch Resets 802.1X authentication parameters to default values on one or
more ports. For details refer to Section 14.3.2.6.
clear dot1x auth-config [authcontrolled-portcontrol]
[keytxenabled] [maxreq] [quietperiod] [reauthenabled]
[reauthperiod] [servertimeout] [supptimeout] [txperiod]
[port-string]
dot1x
authentication
(enable)
Switch Enables or disables 802.1X port-based web authentication. For
details refer to Section 14.3.2.3.
set dot1x {enable | disable}
CLI Task Mode Command Function and Syntax