Specifications

CLI Tasks, Command Functions and Syntax
banner (clear)
A-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
banner (clear)
Switch Clears the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.8.
clear banner motd
banner (set)
Switch Sets the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.7.
set banner motd message
banner (show)
Switch Shows the banner message of the day displayed at session login. For
details, refer to Section 3.2.2.6.
show banner motd
baud (set
system)
Switch Sets the console port baud rate. For details, refer to Section 3.2.2.16.
set system baud rate
broadcast
(enable IP)
Router Enables or disables IP-directed broadcasts on a routing interface.
Section 12.2.4.1.
ip directed-broadcast
broadcast (set
port)
Switch Limits (in packets per second) broadcast suppression on one or
more ports. For details, refer to Section 4.4.9.2.
set port broadcast port-string packet_count [disable | enable]
broadcast
(show port)
Switch Displays port broadcast suppression information for one or more
ports. For details, refer to Section 4.4.9.1.
show port broadcast [port-string]
CDP (set)
Switch Enables or disables the CDP discovery protocol on one or more
ports. For details, refer to Section 3.2.6.2.
set cdp {auto | disable | enable} [port-string]
CDP (show)
Switch Displays the status of the CDP discovery protocol and message
interval on one or more ports. For details, refer to Section 3.2.6.1.
show cdp [port-string]
CLI Task Mode Command Function and Syntax