Specifications

Matrix E1 CLI Quick Reference Guide
access list (set extended)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide A-1
A
Matrix E1 CLI Quick Reference Guide
A.1 OVERVIEW
This quick reference guide provides an alphabetical listing of CLI tasks, each with a brief
description of command function and syntax. Each task’s mode of operation (whether accomplished
by a switch or a router command) is indicated. The section number included in each description
refers to the corresponding page in the this guide where more detailed information about the
command can be found.
A.2 CLI TASKS, COMMAND FUNCTIONS AND SYNTAX
CLI Task Mode Command Function and Syntax
access group
(set)
Router Applies access restrictions on an interface when operating in router
mode. For details, refer to Section 14.3.7.4.
ip access-group access-list-number {in | out}
access list
(show)
Router Displays configured IP access lists when operating in router mode.
For details, refer to Section 14.3.7.1.
show access-lists [access-list-number]
access list (set
extended)
Router Defines an extended IP access list by number when operating in
router mode. For details, refer to Section 14.3.7.3.
access-list access-list-number [insert | replace entry] | [move
destination source1 [source2]] {deny | permit} protocol source
[source-wildcard] [operator [port]] destination
[destination-wildcard] [operator [port]] [icmp-type [icmp-code]