Specifications

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-73
14.3.5.6 set pwa ipaddress
Use this command to set the Secure Harbor IP address. This is the IP address of the end station from
which PWA will prevent network access until the user is authenticated. It is bound to the host name
configured in Section 14.3.5.3.
set pwa ipaddress ip-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set a PWA IP address for 1.2.3.4:
ip-address Specifies a globally unique IP address. This same value
must be configured into every authenticating switch in the
domain.
Matrix>set pwa ipaddress 1.2.3.4