Specifications

Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-66 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
14.3.5.1 show pwa
Use this command to display port web authentication information.
show pwa
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Examples
This example shows how to display PWA information:
Table 14-7 provides an explanation of the command output.
Matrix>show pwa
PWA Status - disabled
PWA Hostname - secureharbour
PWA IP Address - 0.0.0.0
PWA Name Services - disabled
PWA Protocol - PAP
PWA Enhanced Mode - disabled
PWA Logo - displayed
PWA Guest Name - guest
PWA Guest Password -
PWA Guest Network Status - disabled
Port Mode Auth Status QuietPeriod MaxReq
------- ---------------- -------------- ----------- -------
ge.0.1 forceAuthorized authenticated 60 2
ge.0.2 forceAuthorized authenticated 60 2
ge.0.3 forceAuthorized authenticated 60 2
ge.0.4 forceAuthorized authenticated 60 2
ge.0.5 forceAuthorized authenticated 60 2
ge.0.6 forceAuthorized authenticated 60 2