Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-27
14.3.2.7 show eapol
Use this command to display EAPOL settings for one or more ports.
show eapol [port-string]
Syntax Description
Command Type
Switch command.
Command Mode
Read-Only.
Command Alternatives (v3.xx.xx and higher)
• show dot1x (Section 14.3.2.1)
• show dot1x auth-config authcontrolled-portcontrol (Section 14.3.2.4)
Command Defaults
If port-string is not specified, EAPOL settings for all ports will be displayed.
Example
This example shows how to display EAPOL status for Fast Ethernet front panel ports 1-3:
port-string (Optional) Displays EAPOL status for specific port(s). For
a detailed description of possible port-string values, refer to
Section 4.1.2.
Matrix>show eapol fe.0.1-3
EAPOL is disabled.
Port Authentication State Authentication Mode
-------- -------------------- --------------------
fe.0.1 Initialized Auto
fe.0.2 Initialized Auto
fe.0.3 Initialized Auto