Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
14-26 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Command Defaults
• If no parameters are specified, all authentication parameters will be reset.
• If port-string is not specified, parameters will be set on all ports.
Examples
This example shows how to reset the 802.1X port control mode to auto on all ports:
This example shows how to reset reauthentication control to disabled on Fast Ethernet front panel
ports 1-3:
This example shows how to reset the 802.1X quiet period to 60 seconds on Fast Ethernet front panel
ports 1-3:
Matrix>clear dot1x auth-config authcontrolled-portcontrol
Matrix>clear dot1x auth-config reathenabled fe.0.1-3
Matrix>clear dot1x auth-config quietperiod fe.0.1-3