Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-23
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If port-string is not specified, parameters will be set on all ports.
Examples
This example shows how to set EAPOL port control to forced authorized mode on all ports, which
disables authentication on the ports:
This example shows how to enable reauthentication control on Fast Ethernet front panel ports 1-3:
This example shows how to set the 802.1X quiet period to 120 seconds on Fast Ethernet front panel
ports 1-3:
txperiod value Specifies the period (in seconds) allowed for the
transmission of 802.1X keys. Valid values are 1 -
2147483647.
port-string (Optional) Configures authentication settings on specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.
Matrix>set dot1x auth-config authcontrolled-portcontrol forced-auth
Matrix>set dot1x auth-config reathenabled true fe.0.1-3
Matrix>set dot1x auth-config quietperiod 120 fe.0.1-3