Specifications

Security Configuration Command Set
Configuring RADIUS
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 14-9
14.3.1.3 clear radius
Use this command to reset RADIUS server settings to default values.
clear radius {[last-resort-action [local | remote]] [retries] [server {index | all}]
[timeout]}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
If local or remote are not specified, all last resort actions will be reset.
Examples
This example shows how to reset configurations on all RADIUS servers
:
This example shows how to reset the RADIUS timeout to the default value of 20 seconds:
last-resort-action
local | remote
Resets the last resort local and/or remote action to
Challenge.
retries Resets the maximum number of attempts a user can contact
the RADIUS server before timing out to 3.
server index | all Resets a specific or all RADIUS server configurations.
timeout Resets the maximum amount of time to establish contact
with the RADIUS server before timing out to 20 seconds.
Matrix>clear radius server all
Matrix>clear radius timeout