Specifications

Process Overview: Routing Protocol Configuration
Configuring VRRP
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 13-87
13.1.5.2 create
Use this command to create a VRRP session.
create vlan vlan_id vrid
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command disables the VRRP session:
no create vlan vlan_id vrid
Command Type
Router command.
Command Mode
Router configuration: Matrix>Router(config-router)#
Command Defaults
None.
Example
This example shows how to create a VRRP session on VLAN 1 with a VRID of 1:
NOTE: This command must be executed to create an instance of VRRP on a routing
interface (VLAN) before any other VRRP settings can be configured.
vlan vlan_id Specifies the number of the VLAN on which to create a
VRRP session. This VLAN must be configured for IP
routing as described in Section 3.3.2.
vrid Specifies a unique Virtual Router ID (VRID) to associate
with the routing interface. Valid values are from 1 to 255.
Matrix>Router(config)#router vrrp
Matrix>Router(config-router)#create vlan 1 1