Specifications

Process Overview: Routing Protocol Configuration
Configuring IRDP
13-76 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
13.1.4 Configuring IRDP
Purpose
To enable and configure the ICMP Router Discovery Protocol (IRDP) on an interface. This protocol
enables a host to determine the address of a router it can use as a default gateway.
Commands
The commands needed to enable and configure IRDP are listed below and described in the
associated section as shown:
• ip irdp (Section 13.1.4.1)
• ip irdp maxadvertinterval (Section 13.1.4.2)
• ip irdp minadvertinterval (Section 13.1.4.3)
• ip irdp holdtime (Section 13.1.4.4)
• ip irdp preference (Section 13.1.4.5)
• ip irdp address (Section 13.1.4.6)
• no ip irdp multicast (Section 13.1.4.7)
• show ip irdp (Section 13.1.4.8)