Specifications

Process Overview: Routing Protocol Configuration
Configuring OSPF
13-60 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
13.1.2.23 show ip ospf border-routers
Use this command to display information about OSPF internal entries to Area Border Routers
(ABRs) and Autonomous System Boundary Routers (ASBRs).
show ip ospf border-routers
Syntax Description
None.
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
None.
Example
This example shows how to display information about OSPF border routers. The first line of this
output shows that an intra-area route has been established to destination border router 192.168.22.1
via neighboring router 192.168.11.1 on the VLAN 2 interface in area 0. The OSPF cost of this route
is 64, and it carries an SPF calculation of 10. The destination router is an ABR:
Matrix>Router#show ip ospf border-routers
OSPF internal
Codes: i - Intra-area route, I - Inter-area route
i 192.168.22.1
[64] via 192.168.11.1, VLAN2, ABR, Area 0, SPF 10
i 192.168.22.1
[64] via 192.168.11.1, VLAN2, ABR, Area 4, SPF 10
i 192.168.44.1
[64] via 192.168.33.1, VLAN1, ABR, Area 0, SPF 10
i 192.168.44.1
[64] via 192.168.33.1, VLAN1, ABR, Area 2, SPF 7
i 192.168.44.2 [128] via 192.168.33.1, VLAN1, ABR, Area 0, SPF 10
i 192.168.44.2
[128] via 192.168.11.1, VLAN2, ABR, Area 0, SPF 10