Specifications

Process Overview: Routing Protocol Configuration
Configuring OSPF
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 13-31
• Configure OSPF authentication. ip ospf authentication-key (Section 13.1.2.11)
ip ospf message digest key md5 (Section 13.1.2.12)
Configure OSPF Areas.
• Configure an administrative
distance.
distance ospf (Section 13.1.2.13)
• Define the range of addresses to be
used by Area Boundary Routers
(ABRs).
area range (Section 13.1.2.14)
• Enable area authentication. area authentication (Section 13.1.2.15)
• Define an area as a stub area. area stub (Section 13.1.2.16)
• Set the cost value for the default
route that is sent into a stub area.
area default cost (Section 13.1.2.17)
• Define an area as an NSSA. area nssa (Section 13.1.2.18)
Create virtual links. area virtual-link (Section 13.1.2.19)
Enable redistribution from non-OSPF
routes.
redistribute (Section 13.1.2.20)
Monitor and maintain OSPF. show ip ospf (Section 13.1.2.21)
show ip ospf database (Section 13.1.2.22)
show ip ospf border-routers (Section 13.1.2.23)
show ip ospf interface (Section 13.1.2.24)
show ip ospf neighbor (Section 13.1.2.25)
show ip ospf virtual-links (Section 13.1.2.26)
clear ip ospf process (Section 13.1.2.27)
Table 13-2 OSPF Configuration Task List and Commands (Continued)
To do this... Use these commands...