Specifications

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
12-32 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
12.2.5.4 show ip route
Use this command to display information about IP routes.
show ip route [destination prefix destination prefix mask longer-prefixes |
connected | ospf | rip | static | summary]
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If no parameters are specified, all IP route information will be displayed.
destination prefix
destination prefix
mask
longer-prefixes
(Optional) Converts the specified address and mask into a
prefix and displays any routes that match the prefix.
connected (Optional) Displays connected routes.
ospf (Optional) Displays routes configured for the OSPF routing
protocol.
rip (Optional) Displays routes configured for the RIP routing
protocol.
static (Optional) Displays static routes.
summary (Optional) Displays a summary of the IP routing table.