Specifications

IP Configuration Command Set
Reviewing and Configuring the ARP Table
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 12-17
12.2.3.1 show ip arp
Use this command to display entries in the ARP (Address Resolution Protocol) table. ARP converts
an IP address into a physical address.
show ip arp [ip_address] [vlan vlan_id] [output-modifier]
Syntax Description
Configuration Mode
Privileged EXEC: Matrix>Router#
Command Defaults
If no parameters are specified, all entries in the ARP cache will be displayed.
ip_address (Optional) Displays ARP entries related to a specific IP
address.
vlan vlan_id (Optional) Displays only ARP entries learned through a
specific VLAN interface. This VLAN must be configured
for IP routing as described in Section 3.3.2.
output-modifier (Optional) Displays ARP entries within a specific range.
Options are:
• | begin ip_address — Displays only ARP entries that
begin with the specified IP address.
• | exclude ip_address — Excludes ARP entries
matching the specified IP address.
• | include ip_address — Includes ARP entries
matching the specified IP address.