Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
11-56 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.3.13 show dns
Use this command to display DNS (Domain Name Service) settings. DNS translates domain names
into IP addresses.
show dns
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display DNS settings. In this case, DNS is enabled, using three servers
and a domain name of “net.com”:
Matrix>show dns
DNS status: configured
DNS domain: net.com
DNS Servers
------------------
131.141.92.38
131.141.92.39
131.141.92.30