Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-55
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the MAC algorithm mode to mac-vid-sequential:
mac-vid-
sequential
Sets the mode to mac-vid-sequential algorithm, which is
best used by networks where a single MAC can be on more
than one VLAN and it is necessary for the VLAN ID to be
used in the Layer 2 lookup. When running in this mode the,
filter database lookup algorithm is optimized for networks
with MAC addresses that very by the non-vendor bytes of
the address. This is the device’s default setting.
Matrix>set mac algorithm mac-vid-sequential