Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
11-46 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.3.6 show mac
Use this command to display MAC addresses information in the switch’s routing table.
show mac [address mac address] [fid vlan_id] [port port-string] [type {learned
| self | mgmt}]
Syntax Description
Command Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Command Mode
Read-Only.
address mac
address
(Optional) Displays information for a specific MAC
address (if it is known by the device).
fid vlan_id (Optional) Displays MAC addresses for a specific filter
database identifier.
port port-string (Optional) Displays MAC addresses related to a specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.
type (Optional) Displays information related to specific address
type. Valid types are:
• learned - Shows the network MAC addresses learned
by the device.
• self - Shows the device’s own MAC address.
• mgmt - Shows MAC addresses connected to the
management (host) ports.