Specifications

Logging and Network Management Command Set
Managing Switch Network Addresses
11-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.3 Managing Switch Network Addresses
Purpose
To display, add or delete switch ARP table entries, to display or set the status of RAD (Runtime
Address Discovery) protocol, to display or delete MAC address information, to configure DNS and
to execute PING and traceroute.
Commands
Commands to manage switch network addresses are listed below and described in the associated
section as shown.
• show arp (Section 11.2.3.1)
• set arp (Section 11.2.3.2)
• clear arp (Section 11.2.3.3)
• show rad (Section 11.2.3.4)
• set rad (Section 11.2.3.5)
• show mac (Section 11.2.3.6)
• set mac (Section 11.2.3.7)
• clear mac (Section 11.2.3.8)
• show mac agingtime (Section 11.2.3.9)
• set mac agingtime (Section 11.2.3.10)
• clear mac agingtime (Section 11.2.3.11)
• set mac algorithm (Section 11.2.3.12)
• show dns (Section 11.2.3.13)
• set dns domain (Section 11.2.3.14)
• clear dns domain (Section 11.2.3.15)
• set dns server (Section 11.2.3.16)
• clear dns server (Section 11.2.3.17)
• clear dns (Section 11.2.3.18)
• ping (Section 11.2.2.8)
• traceroute (Section 11.2.3.20)