Specifications

Logging and Network Management Command Set
Monitoring Switch Network Events and Status
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-29
11.2.2.4 repeat
Use this command to repeat a command shown in the command history buffer.
repeat [cmd_num] [iterations]
Syntax Description
Command Defaults
If no parameters are specified, the last command will be repeated.
Command Type
Switch.
Command Mode
Read-Write.
cmd_num (Optional) Specifies the number of the command from
the history display.
iterations (Optional) Specifies the number of times to re-execute the
command. Valid values are 0 to 2147483647. Entering 0
causes the specified cmd_num to be repeated endlessly
until the user enters Ctrl+C.