Specifications

Logging and Network Management Command Set
Configuring System Logging
11-24 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.1.15 copy audit-trail
Use this command to copy the Syslog audit trail history buffer to a target file.
copy audit-trail destination
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This command shows how to copy the audit trail history buffer to msgs.
log file on the Syslog server:
destination Specifies the target file where the Syslog audit trail will be
copied. This can be a local file in NVRAM or a file on a
TFTP server.
Matrix>copy audit-trail tftp://172.43.10.77/msgs.log