Specifications

Logging and Network Management Command Set
Configuring System Logging
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 11-17
11.2.1.11 show logging application
Use this command to display the severity level of Syslog messages for applications.
show logging application
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows a portion of the information displayed with the show logging application
command. For a full list of supported applications, refer to Table 11-3.
Table 11-2 provides an explanation of the command output.
Matrix>show logging application
Application Current Severity Level
---------------------------------------------
1 default
2 Syslog 5
3 rtrFE 5
4 RtrCfg 5
5 etsVlan 5
6 SSH 5
7 rtrDvmrp 5
8 rtrOspf 5
-- More --