Specifications

Startup and General Configuration Summary
Factory Default Settings
3-6 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
VLAN classification Classification rules are automatically enabled when created.
VLAN dynamic egress Disabled.
VLAN ID All ports use a VLAN identifier of 1, and are included on the host
VLAN ID 1 port VLAN list.
WebView Enabled.
WebView port Set at TCP port number 80.
Table 3-2 Default Device Settings for Router Mode Operation
Device Feature Default Setting
Access groups (IP
security)
None configured.
Access lists (IP
security)
None configured.
Area authentication
(OSPF)
Disabled.
Area default cost
(OSPF)
Set to 1.
Area NSSA (OSPF) None configured.
Area range (OSPF) None configured.
ARP table No permanent entries configured.
ARP timeout Set to 1200 seconds (20 minutes).
Authentication key
(RIP and OSPF)
None configured.
Authentication mode
(RIP and OSPF)
None configured.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting