Specifications

Logging and Network Management Command Set
Configuring System Logging
11-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
11.2.1.3 show logging console
Use this command to display the global logging state and the severity level at which logging
messages will display to the console port.
show logging console
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows how to display console logging settings. In this case, logging is globally
enabled and the severity level is set to 8 so that debugging level messages will be shown on the
console. For an explanation of the command output, refer back to Table 11-1.
Matrix>show logging console
Global Logging State: Enabled
Logging console session: debugging(8)