Specifications

Startup and General Configuration Summary
Factory Default Settings
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-5
Spanning Tree
topology change trap
suppression
Enabled on edge ports.
Spanning Tree transmit
hold count
Set to 3.
Spanning Tree version Set to mstp (Multiple Spanning Tree).
SSH (Secure Shell) Enabled with the following settings: Listening port: 22. Rekey
interval: 3600 seconds. Login grace time: 60 seconds. Authentication
attempts allowed: 3. Nagle’s algorithm enabled.
System baud rate Set to 9600 baud.
System contact Set to sysContact.
System location Set to sysLocation.
System name Set to sysName.
Telnet Enabled (outbound and inbound). Listening port is set to 23.
Maximum number of inbound, outbound, or SSH sessions allowed is
set to 4.
Terminal CLI display set to 79 columns and 23 rows.
Timeout Set to 5 minutes.
User names Login accounts set to ro for Read-Only access; rw for Read-Write
access; and admin for Super User access.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting