Specifications

IGMP Configuration Command Set
Configuring IGMP VLAN Registration
10-14 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
10.2.4.1 show igmp mode
Use this command to display IVR information for one or more ports.
show igmp mode [port-string]
Syntax Description
Command Defaults
If port-string is not specified, IVR information will be displayed for all ports.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IVR information for front panel Fast Ethernet ports 1 through 3:
Table 10-2 provides details of the command output.
port-string (Optional) Displays IVR information for specific port(s).
For a detailed description of possible port-string values,
refer to Section 4.1.2.
Matrix>show igmp mode fe.0.1-3
IGMP MODE VLAN: 1
IGMP MODE IP: 10.1.2.3
Port Mode Port Mode Port Mode
------------------------------------------------------------
fe.0.1 open fe.0.2 open fe.0.3 open
Table 10-2 show igmp mode Output Details
Output What It Displays...
IGMP MODE
VLAN
VLAN segment to be used by all ports running in IGMP
open mode.
IGMP MODE IP Virtual IP address associated with the VLAN ID through
which all multicast traffic is forwarded.