Specifications

Startup and General Configuration Summary
Factory Default Settings
3-4 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
SNTP Disabled.
Spanning Tree Enabled (globally and on all ports).
Spanning Tree edge
port administrative
status
Disabled.
Spanning Tree edge
port delay
Enabled.
Spanning Tree forward
delay
Set to 15 seconds.
Spanning Tree hello
interval
Set to 2 seconds.
Spanning Tree ID
(SID)
Set to 1.
Spanning Tree legacy
path cost
Enabled.
Spanning Tree
maximum aging time
Set to 20 seconds.
Spanning Tree path
cost
Set to 100 for Ethernet; 10 for Fast Ethernet; and 1 for Gigabit
Ethernet.
Spanning Tree
point-to-point
Set to auto for all Spanning Tree ports.
Spanning Tree port
priority
All ports with bridge priority are set to 128 (medium priority).
Spanning Tree priority Bridge priority is set to 32768.
Spanning Tree real time
BPDU message age
mode
Disabled.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting