Specifications

IGMP Configuration Command Set
Reviewing IGMP Groups
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 10-11
10.2.3.1 show igmp groups
Use this command to display a list of IGMP streams and client connection ports.
show igmp groups
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display IGMP groups. In this example, the device knows to forward all
multicast traffic for IP address 224.47.239.73 to Fast Ethernet front panel ports 25, 31, 43, and 47:
Table 10-1 provides details of the command output.
Matrix>show igmp groups
Vlan Id = 1 MultiCast IP = 224.47.239.73 Type = IGMP
IGMP Port List = fe.0.25, fe.0.31, fe.0.43, fe.0.47
-----------------------------------------------------------------
Multicast group list processed.
Table 10-1 show igmp groups Output Details
Output What It Displays...
Vlan ID VLAN segment configured for IGMP.
Multicast IP IP address associated with the VLAN ID through which all
multicast traffic is forwarded.
Type Protocol type, which is IGMP.
IGMP Port List Port designation(s) wishing to receive multicast
transmissions. For a detailed description of possible
port-string values, refer to Section 4.1.2.