Specifications

Startup and General Configuration Summary
Factory Default Settings
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-3
Port advertised ability Enabled on all ports.
Port broadcast
suppression
Disabled (no broadcast limit).
Port duplex mode Set to half for 10BASE-T and 100BASE-TX; set to full for
1000BASE-X.
Port enable/disable Enabled.
Port priority Set to 1.
Port rate limiting Disabled.
Port speed Set to 10 mbps for 10BASE-T; 100 for 100BASE-TX; and 1000 for
1000BASE-X and 1000BASE-TX.
Port trap All port link traps are enabled.
Priority classification Classification rules are automatically enabled when created.
Priority classification
(802.1p) tag override
Disabled on all ports.
QoS hybrid Set to 25% for weighted queues (1 through 4).
QoS weight
round-robin (WRR)
Set to 25% for weighted queues (0 through 3).
RAD Enabled.
RADIUS client Disabled.
RADIUS last resort
action
When the client is enabled, set to Challenge.
RADIUS retries When the client is enabled, set to 3.
RADIUS timeout When the client is enabled, set to 20 seconds.
Rate limiting Disabled (globally and on all ports).
SNMP Enabled.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting