Specifications

Port Priority and Classification Configuration Commands
Configuring Port Traffic Rate Limiting
9-44 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.6.3 clear port ratelimit
Use this command to reset rate limiting parameters back to default values for one or more priorities
on one or more ports.
clear port ratelimit port-string {priority}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset rate limiting on port priority 5 for Fast Ethernet front panel ports
3 through 7:
port-string Specifies a port on which to reset the rate limiting
threshold and other parameters. For a detailed
description of possible port-string values, refer to
Section 4.1.2.
priority Specifies the 802.1D port priority level associated with
the port-string on which to reset rate limiting. Valid
values are:
• 0 - 7, with 0 specifying the lowest priority, and
• all to reset the rate limiting threshold and other
parameters on all port priority levels associated with
the port-string.
Matrix>clear port ratelimit fe.0.3-7 5