Specifications

Port Priority and Classification Configuration Commands
Configuring Port Traffic Rate Limiting
9-40 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
9.3.6.1 show port ratelimit
Use this command to show the traffic rate limiting configuration on one or more ports.
show port ratelimit [port-string]
Syntax Description
Command Defaults
If port-string is not specified, rate limiting information will be displayed for all
ports.
Command Type
Switch command.
Command Mode
Read-Only.
port-string (Optional) Displays rate limiting parameters for specific
port(s). For a detailed description of possible port-string
values, refer to Section 4.1.2.