Specifications

Startup and General Configuration Summary
Factory Default Settings
3-2 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
Does not apply to MATRIX E7.
GARP timer Join timer set to 20 centiseconds; leave timer set to 60 centiseconds;
leaveall timer set to 1000 centiseconds.
GVRP Globally enabled.
Host VLAN Assigned to default (VID 1) VLAN.
IGMP Disabled. When enabled, query interval is set to 125 seconds and
response time is set to 100 tenths of a second.
IP mask and gateway Subnet mask set to 255.255.0.0; default gateway set to 0.0.0.0
IP routes No static routes configured.
Jumbo frame support Disabled on all ports.
Link aggregation
(LACP)
LACP is enabled on all ports.
Lockout Set to disable Read-Write and Read-Only users, and to lockout the
default admin (Super User) account for 15 minutes, after 3 failed
login attempts,
Logging Syslog port set to UDP port number 514. Logging severity level set
to 5 (warning conditions) for all applications.
MAC aging time Set to 300 seconds.
MAC authentication Disabled (globally and on all ports).
MAC locking Disabled (globally and on all ports).
MAC reauthentication Disabled on all ports. When enabled, reauthentication period and
quiet period are set to 30 seconds.
Passwords Set to an empty string for all default user accounts. User must press
ENTER at the password prompt to access CLI.
Password aging Disabled.
Password history No passwords are checked for duplication.
Port auto-negotiation Enabled on all ports.
Table 3-1 Default Device Settings for Basic and Switch Mode Operation (Continued)
Device Feature Default Setting