Specifications

Port Priority and Classification Configuration Commands
Configuring Priority Classification
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 9-33
9.3.4.8 set priority classification qtagoverride
Use this command to enable or disable the priority tag override feature on one or more ports. When
enabled, this feature lowers the precedence level of 802.1Q (VLAN) frame tags received on
specified ports, allowing MAC address matching and other types of priority classifications to
receive higher precedence. Classification precedence rules with this feature disabled and enabled
are listed in Table 9-2.
set priority classification qtagoverride port-string enable | disable
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable priority tag override on Fast Ethernet front panel ports 1 through
3:
port-string Specifies the port(s) for which to enable or disable
priority tag override. For a detailed description of
possible port-string values, refer to Section 4.1.2.
enable | disable Enables or disables priority tag override.
Matrix>set priority classification qtagoverride fe.0.1-3 enable