Specifications

Policy Classification Configuration Command Set
Assigning Classification Rules to Policy Profiles
8-8 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
8.3.2.1 show policy class
Use this command to display policy classification information.
show policy class [profile-index]
Syntax Description
Command Defaults
If profile-index is not specified, information will be displayed for all profiles.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display policy classification information. In this case, there is a policy
classification entry number 1 assigned to profile index 1. It classifies Ethernet II (0x600) Type
frames to a Class of Service of 0. Currently, port fe.0.1 is active for this rule.
profile-index (Optional) Displays policy classification information for a
specific profile index number. Valid values are 1 - 65535.
Matrix>show policy class
Policy Classification Entries
--------------------------------
Profile index: 1, Classification index: 1,
Priority: 0, Ethernet II Type: 600, Status: enabled,
Port List: None
----------
Port AdminID OperID
------- ------- ------
fe.0.1 1 0
fe.0.2 0 0
fe.0.3 0 0
fe.0.4 0 0
fe.0.5 0 0
fe.0.6 0 0