Specifications

Policy Classification Configuration Command Set
Configuring Policy Profiles
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 8-5
8.3.1.2 set policy profile
Use this command to create a policy profile entry.
set policy profile profile-index {[enable | disable] [name enable | disable vlan-id
enable | disable cos]}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable policy profile 1 named netadmin. VLAN classification is
enabled for this policy on VLAN 1 and Class of Service classification is disabled for class 0:
profile-index Specifies an index number for the profile entry. Valid
values are 1 to 65535.
enable | disable Enables or disables the profile entry.
name Specifies a name for the entry.
enable | disable
vlan-id
Enables or disables PVID override for this profile and a
specified VLAN. Valid values are 1 to 4094.
enable | disable
cos
Enables or disables Class of Service override for this
profile and a specified class. Valid values are 0 to 7.
Matrix>set policy profile 1 enable netadmin enable 1 disable 0