Specifications

VLAN Configuration Command Set
Setting the Host VLAN
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-45
7.3.6.2 set host vlan
Use this command to assign a host VLAN to a secure VLAN where only designated users are
allowed access.
For example, a host VLAN could be specifically created for device management. This would allow
a management station connected to the management VLAN to manage all ports on the device and
make management secure by preventing management via ports assigned to other VLANs.
set host vlan vlan-id
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set VLAN 7 as the host VLAN:
NOTE: Before you can assign a VLAN as the host VLAN, you must create a VLAN first
using the set of commands described in Section 7.3.2.
vlan-id Specifies the number of the VLAN to set as the host
VLAN.
Matrix>set host vlan 7