Specifications

VLAN Configuration Command Set
Setting the Host VLAN
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-43
7.3.6 Setting the Host VLAN
Purpose
To assign the host port on the device to a VLAN that only select devices are allowed to access. This
secures the host port.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
show host vlan (Section 7.3.6.1)
set host vlan (Section 7.3.6.2)
clear host vlan (Section 7.3.6.3)
NOTE: The host port is the management entity of the device.