Specifications

VLAN Configuration Command Set
Configuring the VLAN Egress List
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-23
7.3.4.3 set vlan egress
Use this command to add ports to one or more VLAN egress lists for the device. This determines
which ports will transmit frames for a particular VLAN.
set vlan egress vlan-list port-string [untagged]
Syntax Description
Command Defaults
If untagged is not specified, the port will be added to the VLAN egress list as able
to transmit 802.1Q tagged frames.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add front panel Fast Ethernet ports 5 through 10 to the egress list of
VLAN 7. This means that these ports will transmit VLAN 7 frames
:
vlan-list Specifies the VLAN(s) where port(s) will be added to the
egress list.
port-string Specifies port(s) to add to the VLAN egress list of the
specified vlan-id. For a detailed description of possible
port-string values, refer to Section 4.1.2.
untagged (Optional) Adds the specified ports as untagged ports. This
allows the port to transmit frames that do not include an
IEEE 802.1Q header tag.
Matrix>set vlan egress 7 fe.0.5-10