Specifications

VLAN Configuration Command Set
Creating and Naming Static VLANs
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 7-11
7.3.2.2 set vlan name
Use this command to set the ASCII name for a new or existing VLAN. Once set, you can use the
vlan-name interchangeably with the vlan-id in the show vlan, show vlan static and show vlan
dynamicegress commands.
set vlan name vlan-id | vlan-name
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the name for VLAN 7 to green:
NOTES: Each VLAN ID must be unique. If a duplicate VLAN ID is entered, the device
assumes that the Administrator intends to modify the existing VLAN.
Enter the VLAN ID using a unique number between 2 and 4094. The VLAN IDs of 0, 1,
and 4094 and higher may not be used for user-defined VLANs.
vlan-id Specifies the VLAN to be named.
vlan-name Specifies the string used as the name of the VLAN (1 to 32
characters).
Matrix>set vlan name 7 green