Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
6-70 Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide
6.2.2.19 clear spantree securespantimeout
Use this command to reset the Spanning Tree secure span timeout to the default value of 300
seconds.
clear spantree securespantimeout
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the secure span timeout to 300 seconds:
Matrix>clear spantree securespantimeout