Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-69
6.2.2.18 set spantree securespantimeout
Use this command to set the amount of time (in seconds) an edge port will remain locked by the
secure span function.
set spantree securespantimeout timeout
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the secure span timeout to 600 seconds:
timeout Specifies a timeout value in seconds. Valid values are 0
(forever) to 65535.
Matrix>set spantree securespantimeout 600