Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 6-53
6.2.2.3 clear spantree portadmin
Use this command to reset the default Spanning Tree admin status to enable on one or more ports.
clear spantree portadmin [port-string]
Syntax Description
Command Defaults
If port-string is not specified, status will be reset on all ports.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to re-enable Spanning Tree on Fast Ethernet front panel port 12:
port-string (Optional) Resets status to enable on specific port(s). For
a detailed description of possible port-string values, refer
to Section 4.1.2.
Matrix>clear spantree portadmin fe.0.12